Changing engine switch modes
Modes can be changed by pressing the engine switch with brake pedal
released. (The mode changes each time the switch is pressed.)
1
Off*
The emergency flashers can be used.
The multi-information display will
not be displayed.
2
ACCESSORY mode
Some electrical components such as
the audio system can be used.
"ACCESSORY" will be displayed
on the meters.
3
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed
on the meters.
*
: If the shift lever is in a position other
than P when turning off the engine,
the engine switch will be turned to
ACCESSORY mode, not to off.
When stopping the engine with the shift lever in a position other
than P
If the engine is stopped with the shift lever in a position other than P, the
engine switch will not be turned off but instead be turned to ACCES-
SORY mode. Perform the following procedure to turn the switch off:
1
Check that the parking brake is set.
2
Shift the shift lever to P.
3
Check that "Turn Power OFF" is displayed on the multi-information
display and then press the engine switch once.
4
Check that "Turn Power OFF" on the multi-information display is off.
IS250_EE(OM53B11E)
4-2. Driving procedures
191
4