Table of Contents
Advertisement
460
7-3. Do-it-yourself maintenance
8
Install the visor cover on the
mirror frame, secure it with a
screw, and install the side turn
signal light and outer foot
light.
Use only the screw position
shown in the illustration.
Align the tabs on the side turn
signal light unit and the cover and
install it.
Interlock the groove of the outer
foot light unit with the tabs on the
cover and secure it.
After installing the outer foot
light unit, turn on the outer foot
light to visually check that there
is no light leaking from the bulb
base.
9
Disconnect the tabs, and sepa-
rate the top and bottom of the
outer cover of the mirror.
IS250_EE(OM53B11E)
Advertisement
Table of Contents
