Lexus 2013 IS250 Owner's Manual page 516

2
Slightly loosen the wheel nuts
(one turn).
3
Turn the tire jack portion "A" by
hand until the notch of the jack is
in contact with the jack point.
The jack point guides are located
under the rocker panel. They indi-
cate the jack point positions.
4
Raise the vehicle until the tire is
slightly raised off the ground.
5
Remove all the wheel nuts and
the tire.
When resting the tire on the ground,
place the tire so that the wheel
design faces up to avoid scratching
the wheel surface.
IS250_EE(OM53B11E)
8-2. Steps to take in an emergency
501
8