Table of Contents
Advertisement
Rear turn signal lights
1
Open the trunk, and remove
the 2 covers and 2 screws.
When removing the cover, wrap
the tip of the screwdriver with
tape to protect the vehicle from
damage.
2
Push and pull the light unit
toward the rear of the vehicle
as shown in the illustration to
remove it.
Apply protective tape to the
peripheral of the light unit instal-
lation surface on the vehicle body,
such as the rear bumper, to protect
the vehicle from damage.
Pushing on the portion A in the
illustration toward the rear of the
vehicle will make disengagement
of the tabs easier.
3
Turn the bulb base counter-
clockwise.
4
Remove the light bulb.
IS250_EE(OM53B11E)
7-3. Do-it-yourself maintenance
455
7
Advertisement
Table of Contents
