4-2. Driving Procedures; Engine (Ignition) Switch - Lexus 2013 IS250 Owner's Manual

190

4-2. Driving procedures

Engine (ignition) switch

Performing the following operations when carrying the electronic key on
your person starts the engine or changes engine switch modes.
Starting the engine
1
Check that the parking brake is set.
2
Check that the shift lever is in P.
3
Firmly depress the brake pedal.
and a message will be displayed on the multi-information display.
If it is not displayed, the engine cannot be started.
4
Press the engine switch.
The engine will crank until it starts
or for up to 30 seconds, whichever is
less.
Continue depressing the brake pedal
until the engine is completely
started.
The engine can be started from any
engine switch mode.
Stopping the engine
1
Stop the vehicle.
2
Shift the shift lever to P.
3
Set the parking brake. (P. 203)
4
Press the engine switch.
5
Release the brake pedal and check that the display on the meters is off.
IS250_EE(OM53B11E)