Instrument Panel Light Control - Lexus 2013 IS250 Owner's Manual

98
2. Instrument cluster

Instrument panel light control

The brightness of the instrument panel lights can be adjusted.
1
Darker
2
Brighter

The meters and display illuminate when
The engine switch is in IGNITION ON mode.

Instrument panel brightness adjustment
The instrument panel brightness levels when the tail lights are on and off can be
adjusted individually. However, when the surroundings are bright (daytime, etc.),
turning on the tail lights will not change the instrument panel brightness.

Outside temperature display
In the following situations, the correct outside temperature may not be displayed,
or the display may take longer than normal to change.

When stopped, or driving at low speeds (less than 20 km/h [12 mph])

When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)

Pop-up display
In some situations, such as when a switch operation is performed, a pop-up dis-
play, such as the operating methods of the headlight switch, will be temporarily
displayed on the multi-information display or the odometer/trip meter screen (F
SPORT models only).
The pop-up display function can be set on/off. (P. 103)

Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is charac-
teristic of liquid crystal displays, and there is no problem continuing to use the
display.

Customization
The meter display can be customized on the multi-information display. (P.
100)
IS250_EE(OM53B11E)