Lexus 2013 IS250 Owner's Manual page 69

Installing child restraints using a seat belt
Rear-facing  Baby seat/child seat

1
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature), secure
the child restraint system using a
locking clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
IS250_EE(OM53B11E)
1-1. For safe use
69
1