Lexus 2013 IS250 Owner's Manual page 212

210
4-3. Operating the lights and wipers
• The vehicle is used in a territory in which vehicles travel on the opposite side
of the road of the country for which the vehicle is approved, for example
using a vehicle designed for right-hand traffic in a left-hand traffic territory,
or vice versa.
CAUTION

Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, taking care to
observe your surroundings and turning high beam on or off manually if neces-
sary.
NOTICE

Notes when using the Automatic High Beam system
Observe the following to ensure that the
Automatic High Beam functions correctly.

Do not touch the camera sensor.

Do not subject the camera sensor to a strong impact.

Do not disassemble the camera sensor.

Do not spill liquid onto the camera sensor.

Do not apply window tinting or stickers to the camera sensor or the area of
windshield near the camera sensor.

Do not place items on the dashboard. There is a possibility that the camera
sensor will mistake items reflected in the windshield for streetlights, the head-
lights of other vehicles, etc.

Do not install a parking tag or any other accessories near or around the cam-
era sensor.

Do not overload the vehicle.

Do not modify the vehicle.

Do not replace windshield with non-genuine windshield.
Contact any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
IS250_EE(OM53B11E)