Table of Contents
Advertisement
461
7-3. Do-it-yourself maintenance
10
Install the outer cover of the
mirror by installing the lower
side first, then installing the
upper side.
When installing the lower side of
the cover, insert the side turn sig-
nal light pin into the hole in the
cover.
11
Secure the cover with screws
and reconnect the connectors
back together.
Secure the wire harness by rein-
stalling it to the hooks on the back
side of the mirror surface as it
was.
7
12
Align the tabs, and secure the
mirror by pushing in each
diagonally-opposite pair of
tabs in order.
Make sure to insert the tabs in
order as shown in the illustration,
and push them in until a click is
heard.
If you do not hear the click, do
not force the tabs in. Instead,
remove the mirror and check that
the tabs are aligned.
After securing the mirror, remove
the protective tape applied to the
lower part of the mirror cover.
IS250_EE(OM53B11E)
Advertisement
Table of Contents
