Driving position memory
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be memorized and recalled by
pressing a button. It is also possible to set this function to activate auto-
matically when the doors are unlocked.
Three different driving positions can be entered into memory.
Entering a position to memory
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
3
Adjust the driver's seat, steering wheel, and outside rear view mirrors
to the desired positions.
4
While pressing the "SET" button,
or within 3 seconds after the
"SET" button is pressed, press
button "1", "2" or "3" until a
buzzer sounds.
If the selected button has already
been preset, the previously recorded
position will be overwritten.
IS250_EE(OM53B11E)
3-3. Adjusting the seats
149
3
: If equipped