Table of Contents
Advertisement
When driving position memory is linked with door unlock operation
If the driver's door is opened, the driver's seat will move toward the memorized
position but stop slightly beforehand to allow easy access to the vehicle.
Turning the engine switch to ACCESSORY or IGNITION ON mode, or fasten-
ing the driver's seat belt moves the seat fully into the memorized position.
Operating the driving position memory after turning the engine switch off
Memorized seat positions can be activated up to 180 seconds after the driver's
door is opened and another 60 seconds after it is closed again. Memorized steer-
ing wheel position can be activated by pressing the engine switch.
Correct seat position
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the cur-
rent position and the memorized position will not be correctly recalled.
The auto away function for exiting
If the seat is already close to the rearmost position, the auto away function may
not operate when the driver exits the vehicle.
When the driving position is recalled by a memory linked door unlock operation
Since each memorized driving position is registered to a specific electronic key,
the driving position recalled may be different depending on the carried key.
When only doors other than the driver's door are unlocked by the smart entry &
start system, the driving position will not be recalled. In this case, press a driv-
ing position memory button to recall the desired driving position.
Customization
The distance that the driver's seat moves backward during the auto away func-
tion can be changed. (Customizable features: P. 549)
CAUTION
Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passen-
ger or squeeze your body against the steering wheel.
IS250_EE(OM53B11E)
3-3. Adjusting the seats
153
3
Advertisement
Table of Contents
