Lexus 2013 IS250 Owner's Manual page 232

230
4-5. Using the driving support systems
Changing the vehicle-to-vehicle distance
Pressing the button changes the
vehicle-to-vehicle distance as fol-
lows:
1
Long
2
Medium
3
Short
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNI-
TION ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be
displayed.
Vehicle-to-vehicle distance settings
Select a distance from the table below. Note that the distances shown cor-
respond to a vehicle speed of 80 km/h (50 mph). Vehicle-to-vehicle dis-
tance increases/decreases in accordance with vehicle speed.
Canceling and resuming the speed control
1
Pulling the lever toward you can-
cels the cruise control.
The speed setting is also canceled
when the brakes are applied.
2
Pushing the lever up resumes the
cruise control and returns vehicle
speed to the set speed.
Resuming is available when the
vehicle speed is more than approxi-
mately 40 km/h (25 mph).
IS250_EE(OM53B11E)
Distance options
Long
Medium
Short
Preceding
vehicle
Vehicle-to-vehicle distance
Approximately 50 m (160 ft.)
Approximately 40 m (130 ft.)
Approximately 30 m (100 ft.)