Lexus 2013 IS250 Owner's Manual page 106


Rev peak (F SPORT models)
Select to set the rev peak on/off.
When set to on and the engine
speed reaches or exceeds 5000 r/
min, an afterimage of the tachom-
eter will be displayed at the high-
est
approximately 0.5 seconds.

Initialization
Select to reset the meter display settings. (P. 550)

Eco Driving Indicator
1 Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or when
the vehicle is stopped, the light turns off.
2 Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with
current Eco driving ratio based on accel-
eration.
3 Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
Zone of Eco driving
4
Eco Driving Indicator will not operate under the following conditions:

The shift lever is in any position other than D.

A paddle shift switch is operated.

Neither normal mode nor Eco drive mode is selected. (P. 261)

The vehicle speed is approximately 130 km/h (80 mph) or higher.

Suspension of the settings display
In the following situations, the settings display using the meter control switches
will be suspended.

When a warning message appears on the multi-information display

When the vehicle begins to move

Liquid crystal display
P. 98
IS250_EE(OM53B11E)
engine speed for
2. Instrument cluster
105
2