Lexus 2013 IS250 Owner's Manual page 250

248
4-5. Using the driving support systems
NOTICE

To prevent damage to or incorrect operation of the LDA system

Do not modify the headlights or attach stickers to the surface of the lights.

Do not modify the suspension or replace it with non-genuine parts.

Do not install or place anything on the hood or the grille. Also, do not install a
grille guard (bull bars, kangaroo bar etc.).

If your windshield needs repairs, contact any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional.

Camera sensor
Observe the following to ensure that the LDA system functions correctly.

Keep the windshield clean at all times.
Performance could be affected if the windshield is dirty, or if raindrops, con-
densation or ice are adhering to the windshield.

Do not attach a sticker or other items to
the windshield near the camera sensor.

Do not spill liquid onto the camera sensor.

Do not attach window tinting to the windshield.

Do not install an antenna in front of the camera lens.

If the windshield is fogged up, use the windshield defogger to remove fog
from the windshield.
When it is cold, using the heater with air blowing to the feet may allow the
upper part of the windshield to fog up. This will have a negative effect on the
images.

Do not scratch the camera lens, or let it get dirty.
When cleaning the inside of the windshield, be careful not to get any glass
cleaner etc. on the lens. Also, do not touch the lens.
For lens repair, contact any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional.

Do not change the installation position or direction of the camera sensor or
remove it. The direction of the camera sensor is precisely adjusted.

Do not subject the camera sensor to strong impact or force, and do not disas-
semble the camera sensor.

Do not replace windshield with non-genuine windshield.
Contact any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
IS250_EE(OM53B11E)