Connecting A Bluetooth Phone - Lexus ES 300h User Manual

Connecting a Bluetooth
There are two connecting methods available: automatic and manual.
Auto connection
When you register a phone, auto connection will be activated. It is recom-
mended to have the system set to this mode and leave the Bluetooth
place where a good connection can be established.
When the power switch is turned to ACCESSORY or ON mode, the system will
search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent phone that was
connected. The connected result is displayed.
When automatic connection priority is set to on and there is more than one reg-
istered Bluetooth
®
Bluetooth phone with the highest priority. (→P. 345)
Manual connection
When auto connection has failed or "Bluetooth
connect the Bluetooth
Go to "Bluetooth
1
Select the device to connect.
2
Select "Connect XX
3
Player".
If the desired Bluetooth
(→P. 340)
*
1
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
*
2
: XX represents the selected device name.
Reconnecting a Bluetooth
■
If the system cannot connect due to poor signal strength with the power switch in
ACCESSORY or ON mode, the system will automatically attempt to reconnect.
Connecting a phone while Bluetooth
■
®
Bluetooth audio will stop temporarily.
●
It may take time to connect.
●
ES300h_OM_OM33C75U_(U)
®
phone
®
phone available, the system will automatically connect to the
®
device manually.
1
*
Setup": "MENU" button → "Setup" → "Bluetooth
2
*
", "Connect as a Phone" or "Connect as an Audio
®
device is not displayed, register the device.
®
phone
®
audio is playing
5-7. Connecting Bluetooth
1
*
Power" is turned off, you must
343
®
®
phone in a
5
1
*
"