Lexus 2013 IS250 Owner's Manual page 468

4
Remove the light bulb.
5
Install a new light bulb then
install the bulb base to the
light unit by inserting it and
turning the bulb base clock-
wise.
After installing the light bulb,
turn on the front turn signal light
to visually check that there is no
light leaking from the bulb base.
6
Reinstall the fender liner, fas-
ten the clamp and install the 2
clips.
Install the lower clip by inserting
it with the clip groove held verti-
cally straight.
IS250_EE(OM53B11E)
7-3. Do-it-yourself maintenance
453
7