Lexus 2013 IS250 Owner's Manual page 314

302
5-2. Setup
Customizing images
1
Go to "Customize images":
ize images"
2
Select "Set images" and then select the desired image.
1
Set as startup image.
2
Set as screen off image.
3
Set as startup image and
screen off image.

Adding an image
1
Connect a USB memory device. (P. 299)
2
Select "Copy from USB" on the "Customize images" screen and
then select the desired image.
3
Move the controller to the left and then select "Copy".
Up to 10 images can be downloaded.

Deleting images
Select "Delete images" on the "Customize images" screen and then
select the desired images.

USB memory
When saving the images to a USB memory device, name the folder that the
images are saved to "Image".

Compatible device formats
The following device format can be used:
• The image's file format must be JPEG
• USB communication format: USB2.0 FS (480 Mbps)
• File system format: FAT16/32 (Windows)
• Correspondence class: Mass storage class

JPEG file compatibility
Compatible image size: Maximum 10MB
IS250_EE(OM53B11E)
 "Setup"  "General"  "Custom-