Lexus 2013 IS250 Owner's Manual page 64

64
1-1. For safe use
(1) For the child restraint system which do not carry the ISO/XX size
class identification (A to G), for the applicable mass group, the car
manufacturer shall indicate the vehicle specific ISOFIX child
restraint system(s) recommended for each position.
Key of letters inserted in the above table:
IUF: Suitable for ISOFIX forward-facing child restraint systems of uni-
versal category approved for use in this mass group.
IL1: Suitable for "LEXUS MINI" (0 to 13 kg [0 to 28 lb.]) approved for
the use in this mass group.
IL2: Suitable for "LEXUS MIDI" (0 to 18 kg [0 to 39 lb.]) approved for
the use in this mass group.
When using a "LEXUS MINI" or "LEXUS MIDI", adjust the support leg
and the ISOFIX connectors as follows:
1
Lock the support leg where 4th
hole can be seen. ("LEXUS
MIDI"
MINI")
2
Lock the support leg where 6th
hole can be seen. ("LEXUS
MIDI" forward-facing only)
3
Lock the ISOFIX connectors
where numbers 4 and 5 can be
seen.
IL3: Refer to the "HTS iZi Kid X3" user manual for fitment method.
X: ISOFIX position not suitable for ISOFIX child restraint systems in
this mass group and/or this size class.
*
: Remove the head restraint if it interferes with your child restraint system. Do
not sit on rear center seat when child restraint system is installed to rear left
seat.
The child restraint system mentioned in the table may not be available
outside of the EU area.
Other child restraint systems which are different from the systems men-
tioned in the table can be used, but the suitability of the systems must be
carefully checked with the child restraint system manufacturer and
retailer.
IS250_EE(OM53B11E)
rear-facing, "LEXUS