Driving Procedures; Engine (Ignition) Switch - Lexus RCF 2022 Owner's Manual

Table of Contents

Advertisement

128

4-2. Driving procedures

4-2.Driving procedures

Engine (ignition) switch

Performing the following opera-
tions when carrying the electronic
key on your person starts the
engine or changes engine switch
modes.
Starting the engine
1
Check that the parking brake is set.
2
Check that the shift lever is in P.
3
Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the engine cannot be
started.
4
Press the engine switch shortly and
firmly.
When operating the engine switch, one
short, firm press is enough.
It is not necessary to press and hold the
switch.
The engine will crank until it starts or for up
to 30 seconds, whichever is less.
Continue depressing the brake pedal until
the engine is completely started.
The engine can be started from any engine
switch mode.
If the engine does not start
The engine immobilizer system may not
have been deactivated. (P.57)
Contact your Lexus dealer.
Check that the shift lever is securely set in
P. The engine may not start if the shift
lever is displaced out of P.
Electronic key battery depletion
P.88
Conditions affecting operation
P.100
Notes for the entry function
P.100
Steering lock function
After turning the engine switch off and
opening and closing the doors, the steer-
ing wheel will be locked due to the steer-
ing lock function. Operating the engine
switch again automatically cancels the
steering lock.
When the steering lock cannot be
released, "Steering Wheel Lock Press
Engine Switch while Turning Wheel" will
be displayed on the multi-information dis-
play.
Check that the shift lever is in P. Press the
engine switch while turning the steering
wheel left and right.
To prevent the steering lock motor from
overheating, operation of the motor may
be suspended if the engine is turned on
and off repeatedly in a short period of
time. In this case, refrain from operating
the engine switch. After about 10 sec-
onds, the steering lock motor will resume
functioning.
Electronic key battery
P.281
Operation of the engine switch
If the switch is not pressed shortly and

Advertisement

Table of Contents
loading

Table of Contents