Operation
Driver Installation
Figure 7-20
Windows ME - USB/CAPI installation location.
5.
A message will appear informing that a driver has been found. Click "Next" to proceed.
6.
The installation of the USB drivers will be confirmed. Click "Finish."
7.
A message will appear informing that HiPath 1000is being searched for. Repeat driver
installation procedures for USB interface devices (Steps 1 to 6)
To install administration + CAPI Interface drivers, follow these steps:
8.
A message will appear indicating that the best driver for the hardware has been found.
Click "Next" to proceed.
7-302
Service Manual