Hipath 1100 Manager; Adsl Settings; Adsl Module - Siemens HiPath 1100 Service Manual

Operation
HiPath 1100 applications
7.4.3

HiPath 1100 Manager

The HiPath 1100 Manager is an administration software designed for programming HiPath
1100 systems quickly and easily using a graphical interface without the need to know
programming codes.
The HiPath 1100 Manager can access the switch as follows:
Locally: Connecting a USB interface, an optiPoint 500 UP0/E interface, or a V.24 interface
●
Remotely: The system can be accessed locally through a LAN as long as there is a
●
network PC connected to the HiPath 1100 via serial interface, USB interface or an ADSL
module
Offline Programming Mode: Allows you to view, edit and store a HiPath 1100 database on
●
a PC that is not currently connected to the PABX and later transfer it to the PABX.
You can also update the HiPath 1100 software using the Software Update then store the
database with the system's settings.
If the database has been previously saved in earlier versions and you want to update
the database to HiPath 1100 V7.0, all you need to do is restore the *.bup file and the
system will run an automatic update. Once the restore process is completed, a
popup message will appear informing the user of the changes resulting from the
restore process.
When using remote administration over an ISDN digital line, where no traffic is
detected between the system and the remote programmer, the system can be
configured to terminate the connection after a specified period of time (1 to 60
minutes) or to maintain the connection indefinitely. The default timeout setting is 30
minutes.
Read the HiPath 1100 Manager Help file before proceeding with this operation.
7.4.4

ADSL settings

7.4.4.1

ADSL module

The installation CD contains certain software programs, in release 2.6 or higher, to help you to
configure the module.
General Information:
– TCP/IP protocol
7-336
Service Manual