Figure 7-31 Windows 2003 - Msn - Siemens HiPath 1100 Service Manual

6. Enter the MSN-CAPI number (see Table 6-3 on page 6-206) (for HiPath 1120/1150 the
default extension is 10 and for HiPath 1190 the default extension is 100) in "Add," in the
Multi-subscriber Numbers" box.
Figure 7-31 Windows 2003 - MSN
7. The installation of the USB drivers will be confirmed. Click "Finish."
8. A message will appear that HiPath 1000 drivers are being searched for. Repeat driver
installation procedures for USB interface devices (Steps 1 to 3)
9. Click "Next" to proceed.
10. A message will appear twice to the effect that the driver does not have a Windows logo.
Click "Continue" every time this message will appear.
11. The installation of the USB drivers is now complete. CAPI applications installation will now
start automatically (see "CAPI Application setup" on page 7-313).
Service Manual
Operation
Driver Installation
7-309