Uninstall - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
The USB drivers are Plug&Play compatible, so that after installation, the optiPoint
system may be removed and added again to the computer configuration - by simply
unplugging or connecting the USB cable. The drivers do not need to be reinstalled.
The equipment is ready for operation.
7.3.2.4

Uninstall

For the S connection, follow steps 1, 6 and 7 of the procedure
●
0
For the USB connection, follow steps 1 through 7 of the procedure below.
●
Procedure:
1. To exit CommServer, right-click the CommServer icon on the Windows Status bar and
select Finish.
2. Exit all online services for optiPoint CallBridge for Data
3. Disconnect the computer USB cable from the optiPoint system
4. To remove the USB drivers, proceed as follows:
For FULL removal, use Uninstall, or the Uninstall feature on the CD.
5. Uninstall CallBridge for Data Utilities (if previously installed to use online services or USB
connections), by running the Uninstall program as follows: Start/Programs/CallBridge for
Data Utilities/Uninstall CallBridge for Data Utilities. Once CallBridge for Data Utilities has
been uninstalled, answer "No" when asked if you want to restart your computer, and
proceed with step 6.
6. Uninstall all HiPath 1100 components as follows:
Start/Settings/Control Panel/Software, then click on "Remove Software"
7. Next, restart your computer.
7-332
Service Manual