Figure 3-46 Assigning Button Pad Contacts - Siemens HiPath 1100 Service Manual

Modules
Entrance telephone
Figure 3-46 Assigning button pad contacts
Examples of connection
Depending on the functions desired, the connection should be made with an electric entrance
telephone (TFE-S) with amplifier.
In the analog interface, the a wire should be connected to the negative and the b wire to
the positive.
3-110
X1
Potentiometer
- +
X5
1 2 3 4
X1
Potentiometer
- +
X5
X2
1 2 3 4
Connection in:
Button pad
Ritto 5760
X4
1 2 3 4
X2
Connection in:
Button pad
Siedle TLM 511-01
(Siedle TLM 511-02 -
not possible!)
X4
1 2 3 4
X3
1 2 3 4
X3
1 2 3 4
Service Manual