Technical Standards And Compliance; Technical Standards And Compliance; Table 2-10 Technical Data - Siemens HiPath 1100 Service Manual

Element
Open loop isolation
resistance between A/B or a/
ground or b/ground
Closed loop line resistance/
continuous loop current
Incoming Call Detection
*〉
Values vary according to the country. The values shown are specifically for Brazil.
**〉
Values depend on the country settings, which are configurable. The values shown are default values for Brazil.
Table 2-10 Technical Data
Values shown are approximate. When making connections, consider the specific
level of tolerance that applies.
2.7

Technical standards and compliance

Compliance
Electrical Safety
Environmental Conditions
Power Surge
Fast Transients
Static electricity discharge
*〉 Weather conditions: Operation 3K3 Transportation 2K4 Storage 1K3.
Mechanical: Operation 3M3 Transportation 2M2 Storage 1M2.
Table 2-11 Standards and compliance
Service Manual

Technical standards and compliance

HiPath 1120
Complies with national requirements/standards
Standard
EN60950
IEC 60950
UL 60950-1
IEC 721
IEC61000-4-5
(IEC 801-5)
TIA-968-A
IEC61000-4-4
(IEC 801-4)
IEC61000-4-2
(IEC 801-2)
HiPath 1150
> 10MΩ
> 9V
RMS
Note
Level 3
Level 3
Air - Level 3 (8kV)
Contact - Level 2 (4kV)
System Data
HiPath 1190
*
2-39