On The Hipath1150/1190/1190R; Figure 4-22 Installing A Baby Board Adslmodule Hipath 1120 - Siemens HiPath 1100 Service Manual

Installation
Installing modules
Assembly Diagram
Figure 4-22 Installing a Baby Board ADSLmodule HiPath 1120
4.7.6.2

On the HiPath1150/1190/1190R

Installation Procedures
Step
1. Select the LIMC module.
2. Attach the separators provided with the module.
3. Attach the Baby Board ADSL module to the separators.
4. Connect the cable of the Ethernet Interface to the X6 Connectors.
5. Connect the cable of the ADSL line to the X14 Connectors.
6. Connect the power cable of the module Baby Board ADSL to the X7 Connectors.
7. "Performing a visual inspection" on page 4-189.
8. Configure the required data (see "Operation" on page 7-278).
4-152
X14
X6
X7
Procedure
X14
X6
X7
Service Manual