Siemens HiPath 1100 Service Manual page 70

Modules
Expansion modules (EB)
It allows permanent call forwarding to another telephone number (CF), Callback if
●
currently busy (CCBS), automatic MSN number search (Search MSN), Call
Deflection (CD) and sending ticket information during the last call (AOC-D) at the
end of the call
(AOC-E).
Features such as Calling Line Identification Presentation (CLIP) and Malicious
●
Call Identification (MCID), Calling Line Identification Restriction(CLIR), to name
but a few, can be provided if enabled by the local carrier.
HiPath 1190/1190R: In the event of a problem occurring with the TME1 link during
an external call, the S2M master (see "Display indications of TME1 module (S2 ac-
cess)" on page 3-77) system will go into a mute state for approximately 3 seconds
while the system clock is synchronized.
A TME1 with S2M access operates on TEI (Terminal Endpoint Identifier) non-auto-
matic mode. TEI value must be configured in the S2M Maintenance tool.
Note: In ISDN, some features depend on contracting and the local console.
TME1 interfaces
Figure 3-14 TME1 module
3-70
Service Manual