Backplane; Hipath 1150; Figure 3-36 Mdf - Connectors; Figure 3-37 Backplane Hipath 1150 - Siemens HiPath 1100 Service Manual

MDF Interfaces
Cables are attached using
pressure
(Dinkle Connector)
Cables are attached
with
screws
Cables are attached using
Connectors
(for example, RJ 45)
Figure 3-36 MDF - Connectors
3.10

Backplane

Introduction
In the HiPath1150/1190/1190R systems, a set of Connectors mounted on a printed circuit
board known as the backplane connects the modules to the motherboard.
3.10.1

HiPath 1150

Interfaces
Figure 3-37 Backplane HiPath 1150
Service Manual
4-way
2-way
Modules
Backplane
8-way
3-101