Examples Of Connection - Siemens HiPath 1100 Service Manual

Modules
Entrance telephone
KL1/KL2Connection of the bell (NB, do not use power supplies from other manufacturers)
●
TO1/TO2Connection of the relay to the electric latch
●
UB1/UB2Power supply for TFE (12-16 V)
●
TS1/TS2Contact for activating the amplifier of the entrance telephone (if required*)
●
*newer amplifiers have a programmable automatic disconnection system. In this case, this
connection will not be required.
3.11.1.1

Examples of connection

No amplifier
Model: S30817-K930-A300 - TFE
●
EGUCOM (Ackermann, Emmerich)
●
HiPath 1100
a
a1 b1
a
Lb
La
Figure 3-40 EGUCOM entrance telephone by Ackermann (Emmerich)
3-104
b
TS1 TS2 UB1 UB2
b TS TS 12V 12V
~
Electric latch
TO1 TO2 KL1 KL2
KL KL kl kl
~
EGUCOM entrance telephone
Z2
Z1
a2 b2
TFE interface
EGUCOM TSS module
A B
Service Manual