Figure 7-50 Windows 2003 - Driver Location; Figure 7-51 Windows 2003 - Isdn - Siemens HiPath 1100 Service Manual

Figure 7-50 Windows 2003 - Driver location
4. Once this is completed, the installation of the optiPoint driver will start A message will
appear (three times) to the effect that the software installation did not pass the Windows
logo test. Click "Continue" every time this message will appear.
5. In the ISDN - optiPoint window, select "European ISDN (DSS1)" then click "Next"
Figure 7-51 Windows 2003 - ISDN
6. Enter the MSN-CAPI number (see Table 6-3 on page 6-206) (valid extension range is X-Y)
in "Add," in the Multi-subscriber Numbers" box.
Service Manual
Operation
Driver Installation
7-327