Remote / Local Connection; External Analog Modem - Siemens HiPath 1100 Service Manual

Operation
System programming mode using a PC
7.2.2

Remote / Local connection

7.2.2.1

External Analog modem

For this option, the HiPath 1100 applications are installed. After restarting the computer
configure the settings on CommServer, HiPath 1100 Manager and the HiPath 1100 system.
Procedure:
1. Connect the analog modem (to connect the modem's extension, see item 4.7 - Connecting
extensions to the system's internal MDF) as follows:
REMOTE
ADMINISTRATION
LOCATION
EXTERNAL or INTERNAL LINE
HiPath 1100 Applications
Manager
Billing
CommServer
Figure 7-8 External analog modem connection
2. Insert the HiPath 1100 CD in the CD drive
If Auto-Run is not configured, go to the Windows Start menu, click Run and then select the
Browse button in the dialog box. Open the SETUP.EXE file on the CD drive.
3. In the Setup window, select the language you want to use
4. A window will appear where you can select the software to be installed
5. Install your selected software components sequentially. For programming the HiPath 1100
system, the following applications must be installed:
HiPath 1100 Manager and
●
CommServer (installs automatically).
●
6. After each component is installed, a message is displayed indicating that the installation
was completed successfully. Click "Next" every time it appears
7-290
Public Network
ANALOG MODEM
Software Transmission
Status Monitor
HiPath 1100
ADMINISTERED
HiPath 1100
Serial
Cable
ANALOG MODEM
EXTERNAL LINE
Service Manual
Extension
of the