Figure 4-13 Installing The Hipath 1190R On A 19" Rack - Siemens HiPath 1100 Service Manual

Installation
Getting to know your systems
module installation procedure
Step
1. Insert module into the appropriate slot.
2. Move the latch to the right to secure each module in place.
3. Secure each latch using the screws.
4. Use the reverse procedure to remove the modules.
Installation on a 19" Rack
Figure 4-13 Installing the HiPath 1190R on a 19" rack
Rack-Mounting Procedure
Step
1. Install the system's brackets on the 19" rack using the screws as shown.
2. Insert the switch into the 19" rack.
3. Secure the switch on the 19" rack using the screws.
4-136
Procedure
Procedure
Service Manual