Installing The Coin Vender (Japan Only) - Kyocera TASKalfa 2551ci Service Manual

1-2-10 Installing the coin vender (option for japan only)
Coin vender installation requires the following parts:
Parts
Coin vender
Vender wire
Vender base
M4 x 6 screw
M4×8 ground screw
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Remove eight screws.
3. Pull the rear cover upwards and then
release three hooks.
4. Remove the rear cover.
Quantity Part.No.
1
ACV-1 (option)
1
1
Supplied with
coin vender
4
1
Rear cover
Screw
Screw
Screws
Screw
1-2-71
Screw
Screw
Screw
Hooks
Figure 1-2-99
2NP-1
Hook