Kyocera TASKalfa 2551ci Service Manual page 165

Item No.
U106 Setting:[OHP/Coated]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
Width<160
160<=Width<220 160<= width of paper <220
220<=Width
3. Press the start key. The value is set.
Method:[B/W]
1. Select the item. The screen for executing each item is displayed.
Light/Normal3
Heavy1
Heavy2-3
Method: [Light/Normal1 / Heavy1 / Heavy2-3]
1. Select the item. The screen for executing each item is displayed.
1st side
2nd side
Setting:[1st side/2nd side]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
Width<160
160<=Width<220 160<= width of paper <220
220<=Width
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
width of paper<160
220<= width of paper
Display
Weight of paper (light to usual 3)
Weight of paper (heavy 1)
Weight of paper (heavy 2 to 3)
Display
Correction value of single-side printing
Correction value of duplex printing
width of paper<160
220<= width of paper
Description
Description
Description
Description
Description
1-3-68
Setting Initial
range setting
0 to 200 40/59
0 to 200 33/42
0 to 200 25/31
Setting Initial
range setting
0 to 200 78/60/43
83/64/45
0 to 200 53/41/30
55/43/31
0 to 200 40/31/22
38/30/21
2NP