Kyocera TASKalfa 2551ci Driver Manual
  1. Manuals
  2. Brands
  3. Kyocera Manuals
  4. All in One Printer
  5. TASKalfa 2551ci
  6. Driver manual

Kyocera TASKalfa 2551ci Driver Manual

Printer driver
Hide thumbs Also See for TASKalfa 2551ci:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Manual

Advertisement

Table of Contents
loading

Related Manuals for Kyocera TASKalfa 2551ci

Summary of Contents for Kyocera TASKalfa 2551ci

  • Page 2: Legal Notes

    Powerpoint® are registered trademarks of Microsoft Corporation in the U.S. and/or other countries. KPDL is a trademark of Kyocera Corporation. PCL® is a trademark of Hewlett-Packard Company. TrueType® and Mac OS® are registered trademark of Apple Inc. Adobe®, Acrobat®, Adobe Reader®, Photoshop® and PostScript® are trademarks of Adobe Systems, Incorporated.

  • Page 3: Table Of Contents

    Selecting a PDL in Printing Preferences ..................2-2 Settings List ........................... 2-2 Print Preview ..........................2-3 Previewing a Print Job ......................2-3 Kyocera Logo ..........................2-3 Displaying Version Information ....................2-3 Displaying Plug-in Information ....................2-3 Chapter 3 Device Settings Accessing Device Settings ......................
  • Page 4 Associate Profile with Application .................... 3-5 Password Protect Administrator Settings ................3-5 Hide Factory Default Profile ..................... 3-5 SNMP ............................3-6 Job E-mail Notification ......................3-7 Lock Settings ..........................3-7 Lock Settings Options ......................3-8 Locking Driver Settings ......................3-8 User Login .............................
  • Page 5 Carbon Copies ..........................5-3 Printing Carbon Copies ......................5-3 Collate ............................5-3 Printing Collated Documents ....................5-4 Orientation ............................ 5-4 Media Type ........................... 5-4 Destination ............................ 5-4 Color ............................. 5-4 EcoPrint ............................5-5 Duplex Printing ..........................5-5 Printing in Duplex Mode ......................5-6 Chapter 6 Layout Multiple Pages per Sheet ......................
  • Page 6 CIE Option ..........................8-6 Image Compression Mode ...................... 8-6 Gloss Mode ........................... 8-7 EcoPrint ............................8-7 Selecting EcoPrint ........................8-7 Color ............................. 8-7 Color Reproduction ........................8-7 Color Correction ........................8-8 Color Adjustment ......................... 8-10 Selecting Custom Color Adjustment ..................8-10 Adjusting HSL (Hue, Saturation, Lightness) ................
  • Page 7 Selecting Pages for Watermark ..................... 11-5 Security Watermark ........................11-5 Adding or Editing a Security Watermark ................11-6 Adjusting Security Watermark Calibration ................11-7 Selecting Pages for Security Watermark ................11-7 Color Optimizer ........................... 11-8 Optimizing RGB Color for Printing ..................11-8 Status Monitor ..........................

  • Page 8: Chapter 1 Installation

    1 Installation A printer driver is an application that manages communication between a printer and your computer. Once installed, the printer driver settings must be configured in the printer Properties and Printing Preferences. There are two methods of installation. Express Install is a quick and easy way to install a driver and certain features in package form.

  • Page 9: Express Install

    Installation lowers costs by reducing the amount of paper that must be purchased. We recommend that printing systems capable of duplex printing use duplex mode by default. This can be set in the printer driver installation process for European locations only. After you click Express mode or Custom mode in the Installer, if the operating system locale is EU and time zone is GMT 0, GMT +1 or GMT +2, a message about resource and energy conservation appears.

  • Page 10: Custom Install

    Installation Review your settings. At least one device and one product must be selected to enable the Install button. If your settings are correct, click Install. During the installation, you can expand or collapse the installation detail by clicking the arrow. When the installation completes successfully, on the Finished page you can select from the following options.

  • Page 11: Installing With Custom Install

    Select a utility from the Utilities list, and click the arrow to move it to the Products to Install list. KYOCERA Net Viewer This utility lets you organize and monitor network printing device information. Kyocera TWAIN Driver This utility lets you scan TWAIN-supported applications.
  • Page 12 Installation KYOCERA Net Direct Print This utility makes PDF printing easier. FONTS This utility loads screen fonts that match the printer’s fonts. If you want to remove a product from the Products to Install list, select it and click Remove at the bottom of the list box. To remove all products, click Remove all.

  • Page 13: Custom Installing Utilities Only

    Kyocera TWAIN Driver This utility lets you scan TWAIN-supported applications. File Management Utility This utility classifies and distributes scanned files. KYOCERA Net Direct Print This utility makes PDF printing easier. FONTS This utility loads screen fonts that match the printer’s fonts.

  • Page 14: Editing Utility Properties

    Editing Utility Properties In the Installer window, click Custom Install. In the Utilities list, select KYOCERA Net Viewer and click the arrow to move it to the Products to Install list. In the Products to Install list, click the Edit pencil icon in the KYOCERA Net Viewer utility product.

  • Page 15: Upgrade

    Installation If a discovery is in process, or at least one discovery device has been added to the Products to install list, the Communication Settings icon is unavailable. Click Custom Install. Under the Devices box, click the Communications Settings icon. In the Communication Settings dialog box, type a Read community name in the text box.

  • Page 16: Optional Printer Components

    Installation Optional Printer Components You can expand the functionality of your printer driver by installing optional components. For the XPS driver, only Common Profiles and Help Modules can be installed. Installing Optional Printer Components Click Maintenance. Select Optional Printer Components and click Run. On the Select Printer page, select one or more printing systems.

  • Page 17: Uninstall

    Installation Uninstall The uninstaller can find the printing system drivers on your local drive. It creates a list of those components in the Uninstall window. If you uninstall a driver, devices using that driver will also be removed. Uninstalling Driver Components You can select drivers or utilities to remove from your local drive.

  • Page 18: Driver Overview

    2 Driver Overview The lower part of each Printing Preferences tab contains overview features that illustrate driver selections. Overview images and the settings list are available when selecting settings. After selecting driver settings, you can use Print preview to check the print job. Note: If the vertical screen resolution of your computer is 864 pixels or less, the lower part of the tab does not appear.

  • Page 19: Selecting A Pdl In Printing Preferences

    Driver Overview The printing system image displays any attached devices. Source and Destination selections are highlighted in green. The hard disk icon appears when a job storage option is selected in the Job tab. The page image is updated based on page selections made in the Quick Print tab, Basic tab, Layout tab, and Finishing tab.

  • Page 20: Print Preview

    If you are satisfied with the preview, click the printer button to print the job. Kyocera Logo The Kyocera logo appears on the bottom portion of any Printing Preferences screen or Device Settings screen. Click the logo to open the About dialog box that displays the driver version number and driver plug-in information.
  • Page 21 Driver Overview Version Click OK to close the driver information dialog boxes. Printer Driver...

  • Page 22: Device Settings

    3 Device Settings In Device Settings, you can select installed printing system options so the associated features can be used with the printer driver. You can also match the memory setting in the driver with the memory installed in your printing system, which lets the driver manage font downloads more efficiently.

  • Page 23: Setting Punch Options

    Device Settings Setting Punch Options Before using the Punch option in the Finishing tab, you must set punch options in Device Settings. In Device Settings > Device options, select a finishing device that supports punch. Or if already selected, double-click the blue text. Depending on the punch unit attached, select one option: None No punch option available in the Finishing tab.

  • Page 24: Auto Configure

    Device Settings You can import a custom box list by clicking Import and browsing for a valid custom box list file (.CSV or .KXU). You can save the current custom box list (.CSV or .KXU) in your computer or network by clicking Export. A saved list can be imported into another printer driver.

  • Page 25: Memory

    Device Settings Select to let the driver check the printing system at every occurrence of a fixed time period. The driver regularly checks for any changes in optional devices or memory. When a change is detected, the driver is automatically updated with the new settings.

  • Page 26: Send Application Name

    Device Settings Send Application Name This option lets you send the application name with a print job, so that a different printing process is used for each application. This option is unavailable when PDF is selected as the PDL. To enable this feature, in Device Settings > Administrator > General, select Send Application name.

  • Page 27: Snmp

    Device Settings Check box clear: The Factory Default profile appears in the lists. SNMP Simple Network Management Protocol (SNMP) is a set of rules that govern the management of network devices, such as printing systems. These settings determine the level of security when using the Auto Configure feature, and prevent unauthorized printing to the SNMPv3 printing system.

  • Page 28: Job E-Mail Notification

    Device Settings In Device Settings > Administrator > General, click SNMP Settings. Select SNMPv1/v2c or SNMPv3. For SNMPv1/v2c, type the Read community name and Write community name, to a maximum of 32 characters, and click OK. For SNMPv3, type a User name to a maximum of 32 characters, and a Password from 8 to 32 characters.

  • Page 29: Lock Settings Options

    Device Settings Locking a setting will also lock the feature where it appears in other tabs. For example, selecting Duplex will also select and lock that feature in the Quick Print and Basic tabs. The administrator can also set a password that is required to temporarily unlock a feature.

  • Page 30: User Login

    Device Settings In the Password Settings dialog box, type a password from 4 to 16 characters. Retype the password in Confirm password, and click OK. To remove the password, clear the Password settings check box. In the Unlock Password dialog box, type the password, and click OK. To save your Lock Settings selections, click OK.

  • Page 31: Printing With User Login

    Device Settings click OK to print. This option ensures that the job prints, only after verifying that the selected name is saved in the driver. Validate user name (computer) or prompt for login user name This option searches for the Windows User name in the driver’s Login user name list.

  • Page 32: Job Accounting

    Device Settings When the Print Options or Identity Settings dialog box appears, type or select a name and password, and click OK. Login is required for some options. Job Accounting Job accounting gives an administrator control of a printing system. With Job accounting, account IDs (identification numbers) can be assigned to users or departments.

  • Page 33: Printing With Job Accounting

    Policy Manager is a server-based application that provides centralized user authentication, authorization, user access control, and secure pull printing features. The KYOCERA Net Policy Manager application must be installed separately. It is also necessary to make settings in the printer driver Device Settings >...

  • Page 34: Selecting Policy Manager Options

    Device Settings When KYOCERA Net Policy Manager 2.0 is installed, the driver displays user accounting information while printing. For a restricted user in a client/server environment, the Administrator button in Device Settings becomes the Identity button. A user can enter Policy Manager data in the Identity Settings dialog box.

  • Page 35: User Settings

    When selected, the Policy Manager Login dialog box does not appear again. Click Log in to send the print job to the KYOCERA Net Policy Manager spooler server, where the Login user name and password are authenticated. Otherwise you can print directly to the printing system instead of using the KYOCERA Net Policy Manager spooler server.

  • Page 36: Units

    Device Settings Units You can set Inches or Millimeters as the unit of measurement. This is used for the following settings: Custom page size setting in the Page Sizes dialog box in the Basic tab. Spacing setting in the Add Watermark and Edit Watermark dialog boxes in the Advanced tab.
  • Page 37 Device Settings PCL XL The most recent version of HP PCL and PCL 6. This PDL includes PCL 5c features. PCL XL lacks backward compatibility with earlier PCL versions, though it is enhanced over PCL 5c in these areas: Reduced file size Better print speed Faster return to application PCL 5c...

  • Page 38: Pdf

    Device Settings This option prevents the printing system from outputting any page that contains no data, or that has, at most, one space character. Selecting this option can save paper, and result in comparatively faster printing times. This feature is for regular printing (not for booklet, duplex or multiple pages per sheet).
  • Page 39 Device Settings PDF Options You can select PDF options if you have installed the Output to PDF plug-in. The PDF Settings dialog box contains the following options: PDF Settings Embed fonts This option ensures that document fonts appear accurately in the PDF file on screen.

  • Page 40: Xps Driver

    Device Settings Require password to open document Type a User password. The user password must be entered at the time the PDF document is opened. This password must be different from the owner password. Print and Save Settings This option lets you print and save a document as a PDF file. Save to file only A PDF file is created and saved locally.

  • Page 41: Compatibility Settings

    Device Settings Specification (XPS). This Page description language provides an additional method for displaying, processing, and printing documents. As both a PDL and a document format, XPS requires compatible printer hardware and software written for the Windows Presentation Foundation (WPF) architecture. PCL and KPDL are not compatible with an XPS environment.

  • Page 42: Combine Source And Media Type Lists

    Note: To remove the Output to PDF module, PDF must not be selected as the PDL. In Device Settings, click Kyocera logo > Plug-in. Select a plug-in module from the list and click Delete, then Yes. Click OK in all dialog boxes.

  • Page 43: Quick Print

    4 Quick Print In the Quick Print tab, you can apply basic print settings to print jobs. Any Quick Print settings can be saved as a group, called a profile, and applied to any print job. Profiles support common printing tasks. The administrator can set the view of the Quick Print tab through the installation process, or in Device Settings >...

  • Page 44: Collate

    Quick Print Collate Collate specifies the order in which the pages of a multiple copy job are printed. With Collate on, the first time the print job is sent to the printing system the data is rendered as page images in the printing system's memory. The remaining job copies are printed from the stored data.

  • Page 45: Pages Per Sheet

    Quick Print Flip on short edge Pages per Sheet Pages per sheet prints several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper. The size and readability of the multiple pages decrease as the number of pages per sheet is increased.

  • Page 46: Editing Quick Print Options

    Quick Print The number of available features depends on the printing system model. If a feature, such as Staple, is added to the Quick Print tab but a finishing device is not installed, the icon appears as unavailable. Once the device is installed and selected in Device Settings, the icon becomes active.

  • Page 47: Selecting A Profile

    Quick Print A maximum of 26 profiles can be established in one driver, including the Factory Default profile. In Device Settings > Administrator, you can choose to hide the Factory Default profile. Settings made in Device Settings tab cannot be saved to a profile. Any profile except Factory Default can be edited, imported, and exported.

  • Page 48: Editing A Profile

    Quick Print The Profiles Button Set the printing options you want for your print job by opening Printing Preferences and selecting all your driver settings. In any tab, click Profiles. Click Save. To identify the profile, type a Name for the new profile, select an Icon, and type a Description.

  • Page 49: Exporting A Profile

    Quick Print Click Apply to use the selected profile for the current print job, or click OK to close the dialog box. The newly added profile appears in the Quick Print tab. Exporting a Profile In any tab, click Profiles. In the Select profile section, select the profile to be exported, and then click Export.
  • Page 50 Quick Print Under Select profile, select a profile from the list. Click OK in the Add Association and Application Based Printing dialog boxes to create the association. You can remove an association by selecting it and clicking Delete. Editing an Association In any tab, click Profiles.

  • Page 51: Chapter 5 Basic

    5 Basic In the Basic tab, you can specify the most commonly used printer driver settings. To return to the original settings, click Reset. The Reset button is available when accessing the printer driver from the application's Print dialog box. Print Size and Page Size Print size controls the output page size of the document.

  • Page 52: Printing With Custom Size Pages

    Basic In the Page Sizes dialog box, click New. A default custom name appears in the Name box. Type a name for your custom page size. Type or select values for the height and width. If the height or width value exceeds the allowable limit, it automatically adjusts to the limit after Apply or OK is clicked.

  • Page 53: Carbon Copies

    Basic Carbon Copies This feature lets you print additional copies on paper from different trays or cassettes. This is useful for printing copies of documents such as invoices on different colored paper or media type. The maximum number of copies can be printed for each carbon copy.

  • Page 54: Printing Collated Documents

    Basic If On (reverse order) is selected, the printed pages appear in reverse order (321, 321). This option is available when Printer default is not selected under Destination in the Basic tab. Printing Collated Documents In the Basic tab, click the Collate icons to change between on and off. Type or select the number of complete sets of the print job in the Copies box.

  • Page 55: Ecoprint

    Basic Black This mode prints with black toner only, suppressing all color settings. Click the icons to change between Full color and Black. Full color and Black also appear in the Quick Print tab and in the Imaging tab. Changes in Quick Print, Basic, or Imaging tabs are reflected in the other tabs.

  • Page 56: Printing In Duplex Mode

    Basic Flip on short edge Printing in Duplex Mode In the Basic tab, click the Flip on long edge or Flip on short edge icon. Click OK to return to the Print dialog box. Click OK to start printing. User Guide...

  • Page 57: Chapter 6 Layout

    6 Layout In the Layout tab, you can arrange document data on printed pages without affecting the original document. To return to the original settings, click Reset. The Reset button is available when accessing the printer driver from the application's Print dialog box. Multiple Pages per Sheet Multiple pages per sheet prints several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper.

  • Page 58: Scaling

    Layout Click OK to return to the Print dialog box. Click OK to start printing. Scaling Scaling increases or decreases text and graphics on a page. You can also select a gutter setting in the Finishing tab that enlarges the margins to accommodate stapling or hole punching.

  • Page 59: Printing A Poster

    Layout Overlap edges This selection duplicates the edges of document data on adjoining sheets. Poster appearance is improved when the edges overlap slightly. Select the check box, then type or select a value between 0.00 and 1.20 inches (0.0 and 30.4 mm). This option reduces the final poster size slightly. Print crop marks This selection prints a border at the edges of each poster sheet.

  • Page 60: Printing A Booklet

    Layout Printing a Booklet In the Layout tab, click the icon for one of the two binding options: Left edge binding This selection prints text that reads from left to right. Right edge binding This selection prints text that reads from right to left. For additional booklet options, click Booklet Settings.

  • Page 61: Chapter 7 Finishing

    7 Finishing In the Finishing tab, you can specify document finishing features such as separating sets of printed jobs, creating a gutter, stapling and punching holes. To return to the original settings, click Reset. The Reset button is available when accessing the printer driver from the application's Print dialog box. Separation The Separation feature stacks print jobs so that one print job can be distinguished from another.

  • Page 62: Rotate Copies

    Finishing Offsetting Jobs You can offset, or shift each print job in the output tray. In Finishing > Separation, click the Offset jobs icon. Click OK to return to the Print dialog box. Click OK to start printing. Rotate Copies Rotate copies stacks each copy of a print job at a right angle in the output tray.

  • Page 63: Finishing Edge Combinations

    Finishing Selecting Finishing edge makes some other features unavailable, such as Separation and Rotated. Finishing edge cannot be used with the Poster feature. Finishing Edge Combinations Finishing edge can be used with the following page size combinations: A4 and A3 (210 x 297 mm and 297 x 420 mm) B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm) Letter and Legal (8.5 x 11 in.

  • Page 64: Gutter

    Finishing Load each paper size into different paper cassettes. For example, load A4 and A3 paper so that both sizes feed the 297 mm edge or load letter and legal paper so that both sizes feed the 8.5 inch edge. Click OK in the application’s Print dialog box.

  • Page 65: Stapling A Print Job

    Finishing maximum number of sheets depends upon the finisher model and the selected Page size or Media type. The Gutter feature lets you increase the top and left margins to accommodate the location of the staples. Staple and Separation features cannot be used together. If Printer default is selected as the Destination in the Basic tab, the selection of an option in the Finishing tab results in the automatic selection of a destination compatible with that finishing option.
  • Page 66 Finishing In the Finishing tab, click the icons to select Off or to select the number of hole punches: 2 hole (inches/metric based) 3 hole (inches based) 4 hole (inches/metric based) Click OK to return to the Print dialog box. Click OK to start printing.

  • Page 67: Chapter 8 Imaging

    8 Imaging In the Imaging tab, you can manage print quality and color settings. To return to the original settings, click Reset. The Reset button is available when accessing the printer driver from the application's Print dialog box. Print Quality and EcoPrint Print quality lets you select between High quality or Custom (EcoPrint).

  • Page 68: Setting Trapping Values

    Imaging media type may shift slightly. While the shift might be very small, the gaps between the colors in the image can be noticeable. Color trapping corrects it by overlapping colors slightly so that minor alignment issues are corrected. Note: If PCL 5c is selected in the PDL Settings dialog box, Trapping is not available.

  • Page 69: Selecting Font Settings

    Imaging increased when using Asian fonts such as Japanese, Chinese, and Korean, because of the large amount of font information used for these particular fonts. Allow native download This method improves text quality and increases print speed by converting TrueType fonts to Adobe Type 42 font format. This feature is available when KPDL is selected as the PDL.

  • Page 70: Disable Device Fonts

    Imaging In the Fonts Substitution dialog box, the System fonts list shows the fonts installed on your computer. The Available device fonts list shows the printing system fonts. Select the system font, and then the available device font to be substituted. Click OK to save your settings.

  • Page 71: Line Thinning

    Imaging In Imaging > Graphics, select a Pattern scaling setting. Auto (default setting) This setting prints patterns and fills to match the on-screen appearance. Coarse This setting prints patterns and fills with the fewest number of lines, patterns, or dots. Coarse is the same as Auto if PCL XL or PCL 5c is selected in the PDL Settings dialog box.

  • Page 72: Inversion Options

    Imaging Resolution priority This setting prints sharper characters and lines. High definition This setting prints small characters and thin lines more clearly. Inversion Options Inversion is the opposite of the normal order, arrangement, or position of an image or printed content. In Imaging >...

  • Page 73: Gloss Mode

    Imaging Uses JPEG compression High quality Uses delta row compression Gloss Mode Gloss mode simulates high-gloss copies by adding a glossy appearance to printed text and images. Note: If EcoPrint is On, Gloss mode is unavailable. EcoPrint EcoPrint changes toner saturation in the print job, making the entire print image, including text and graphics, appear lighter.

  • Page 74: Color Correction

    Imaging This option uses the printer settings only. Text and Graphics This option is for printing documents that contain many graphs, charts or drawings. Text and Photos This option is for printing documents with many photographic images. Vivid colors This option increases the color saturation of graphics and photos. Publications This option is for printing a mix of graphics and/or photos.
  • Page 75 Imaging This option is for matching colors precisely in all print jobs, such as colors in a corporate logo. Optimize for color contrast (best for images) This option optimizes for color contrast by adjusting contrast to preserve detail throughout the tonal range. Select it for images or scanned photographs containing many colors or shades of color.

  • Page 76: Color Adjustment

    Imaging Windows XP and Windows Server 2003 Click Start, and then click Printers and Faxes. Right-click your color model, and select Properties. Select the Color Management tab and click Add. In the Add Profile Association dialog box, select a color profile from the list and click Add.

  • Page 77: Adjusting Color Balance

    Imaging Under Select preview image, click the icon to select one of three different images. Different colors are emphasized in each of the photographs to aid in the color adjustment process. Adjust the distribution and balance of hues. For coordinated hue adjustment, from the Modify list, select Master. Type or select the Hue value between -180 and +180.

  • Page 78: Black And White Adjustment

    Imaging Select this option if the driver receives RGB data from the application. Quality priority Select this option if the driver receives full-color data from the application. In the Job tab, in the Job Storage (e-MPS) > Type list, if saving to Custom Box, it is only possible to print.
  • Page 79 Imaging This option prints grayscale with black only. Full color must be selected as the Color mode. Continuous tone Images are represented by a series of evenly graduated tones, as in a photograph. Full color must be selected as the Color mode. Continuous tone is selected automatically.

  • Page 80: Chapter 9 Publishing

    9 Publishing In the Publishing tab, you can create covers and inserts for a print job, and insert sheets between transparencies. The features on this tab are available only when PCL XL or KPDL is selected in the PDL Settings dialog box. To return to the original settings, click Reset.

  • Page 81: Cover Mode Options

    Publishing In the Media for cover list, select the media type or source cassette for the front and back covers. When you choose the media type, a source cassette matching that media type is automatically selected. Click OK to return to the Print dialog box. Click OK to start printing.
  • Page 82 Publishing Check Box Selection Cover Insertion Type Prints on the outside and inside Front surfaces of the front cover. Front Outside Front Inside Inserts blank front and back covers. Front and back Prints on the outside surface of the Front and back front cover and inserts a blank back Front Outside cover.
  • Page 83 Publishing Check Box Selection Cover Insertion Type Prints on both sides of the front cover Front and back and inserts a blank back cover. Front Outside Front Inside Prints on the inside surface of the Front and back back cover and inserts a blank front Back Inside cover.

  • Page 84: Transparency Interleaving

    Publishing Check Box Selection Cover Insertion Type Prints on both sides of the front and Front and back back covers. Front Outside Front Inside Back Inside Back Outside Transparency Interleaving Transparency interleaving inserts a backing sheet between printed transparencies. The backing sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together.

  • Page 85: Printing Page Inserts

    Publishing Duplex printing must be selected in the Basic tab or Quick Print tab in order to print using the Back option. Although Cover mode and Page insert can be used simultaneously, they cannot be used with Transparency interleaving. Printing Page Inserts In the Publishing tab, click the Page insert icon.
  • Page 86 Publishing Check Box Selection Page Insertion Type Page insert Prints on the back side of the inserted page. Back Prints on both sides of the inserted Page insert page. Front Back User Guide...

  • Page 87: Chapter 10 Job

    10 Job In the Job tab, you can store print jobs in the memory installed in the printing system. You can also select a Job name to use with Job storage features. You can use this tab to set or change the default settings that apply when you print a document from a Microsoft Windows application.

  • Page 88: Custom Box

    Custom box Hard disk Optional password When printed from When manually operation panel deleted or up to 31 days Quick copy Hard disk When sent from the When printing computer system is turned off, hard disk is full, or job retention date in the printing system is passed Proof and hold...

  • Page 89: Quick Copy

    Select Verify box number for each login user, and click OK. When the Custom Box dialog box appears, type a box number. To include a password, select Require password and type the password. This can be selected when Shared box is selected in the Hard Disk Settings dialog box.

  • Page 90: Printing A Proof And Hold Job

    After the proof copy is printed and checked, remaining copies can be printed from the printing system’s operation panel without sending the job again from the computer. If desired, you can change the number of copies printed. Note: Proof and hold is not available for some applications such as Microsoft Excel.

  • Page 91: Storing A Private Print Job

    Storing a Private Print Job Private print lets you store a document temporarily in printing system memory without printing, and protect it with an Access code. The job is stored on the storage device until it is printed or manually deleted, or the printing system is turned off.

  • Page 92: Job Name

    In the Type list, select Job storage. If you want to restrict access to your document, select Access code and type four numbers in the box. Click OK to return to the Print dialog box. Click OK to start printing. Job Name A Job name is a unique identifier for each print job.
  • Page 93 In the Job tab under Job name, select a name: Application defined This option uses the name of the application document as the job name. For Microsoft Word or PowerPoint documents, selecting Don’t use application name removes the name of the application so that only the document name appears as the job name.

  • Page 94: Chapter 11 Advanced

    11 Advanced In the Advanced tab, you can choose special features that extend the capabilities of the printing system. To return to the original settings, click Reset. The Reset button is available when accessing the printer driver from the application's Print dialog box. Prologue/Epilogue The Prologue/Epilogue feature lets you insert a command file at the beginning of a print job or at the end.

  • Page 95: Editing A Prologue/Epilogue File

    Advanced Editing a Prologue/Epilogue File You can edit a Prologue/Epilogue file on your computer. In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name from the list, and then click Edit. After your text editor opens, make your changes to the file. Save the file and exit.

  • Page 96: Watermark

    Advanced Note: The Start of the page and End of the page insertion point options are available only if PCL 5c is selected in the PDL Settings dialog box. With a command file selected in the list, choose one insertion point option: Unassigned The selected command file is not inserted into the print job.

  • Page 97: Adding Or Editing A Watermark

    Advanced Adding or Editing a Watermark In the Advanced tab, click Watermark. In the Watermark dialog box, click Add to create a user defined watermark; or under Select watermark, select a default or custom watermark and click Edit. Under Watermark name, type a name, to a maximum of 39 characters. A default watermark cannot be renamed.

  • Page 98: Selecting Pages For Watermark

    Advanced Selecting Pages for Watermark In Advanced > Watermark > Select watermark, choose a default or custom watermark to print. Under Page selection, choose pages for printing the watermark: All pages This option prints the watermark on each document page. First page only This option prints the watermark on the first document page.

  • Page 99: Adding Or Editing A Security Watermark

    Advanced Color Optimizer in the Advanced tab is set to None. The reverse is also true. If these features are changed, then the Security Watermark selection is set to None, and cannot be used. Adding or Editing a Security Watermark You can create a new security watermark that displays text but not an image.

  • Page 100: Adjusting Security Watermark Calibration

    Advanced When selecting Color Mode > Black & White in the Imaging tab, the only option for watermark colors is black. For Security Watermark, Overprint is set by default. The security watermark is printed over the document data so that it can appear clearly in a photocopy. Adjust the calibration.

  • Page 101: Color Optimizer

    Advanced Under Page selection, choose pages for printing the security watermark: All pages This option prints the security watermark on each document page. First page only This option prints the security watermark on the first document page. All pages except first page This option prints the security watermark on all pages after the first page.

  • Page 102: Status Monitor

    Advanced From the application's File menu, click Print, then click Preferences or Properties to open the Properties dialog box. In Advanced > Color Optimizer > Color adjustment, select Custom 1, Custom 2, or Custom 3. Under Color reproduction, select from available options. Select each color by one of the following methods: Drag the eyedropper tool anywhere on the screen to select the desired color.

  • Page 103: Setting Status Monitor Preferences

    Select to increase the size of the Status Monitor image. Notification Opens a dialog box with options for Status Monitor event notification and sound files. www.kyoceradocumentsolutions.com Opens a web browser to the KYOCERA Document Solutions Inc. home page. Exit Closes the Status Monitor image. Setting Status Monitor Preferences You can configure printing system alerts with accompanying sound or speech in the status monitor Preference dialog box.

  • Page 104: Emf Spooling

    Advanced Select the Enables Event Notification check box. Select an event for a Status Monitor alert. Cover open Paper jam Add paper Sleep Add toner Toner low Not connected Printing completed Others You can also add sound or speech to your chosen alert. To add a sound file: Clear the Use Text to speech check box.

  • Page 105: Enable Client Profile

    Advanced Enable Client Profile Client profile refers to profile settings saved on a client computer. You have the choice to use your local profiles or the server profiles. This feature is intended for the client computer in a client-server environment. In the Advanced tab, clear the Enable client profile check box to select profiles from the server to apply to print jobs created by the driver.

  • Page 106: Glossary

    Glossary Access code A four-digit code that you must enter at the printing system’s operation panel to print a Private print job. Application based printing An administrator can associate a profile with an application so that all printing from the application uses the same profile settings. This makes profiles easier to use and ensures consistent printing from an application.
  • Page 107 Don't use application name Don't use application name is an option to shorten the application defined job name for jobs created in Microsoft Word or PowerPoint. The file name will appear clearly in the job list. EcoPrint Imaging feature that changes toner saturation, making the entire image, text and graphics, appear lighter in the printed job.
  • Page 108 Job accounting An accounting system that records and controls the number of pages printed by each account ID. Account IDs can be assigned at the printing system and stored in the driver. After account IDs are assigned, you can use the Job accounting option to print in the Job accounting mode.
  • Page 109 If printed patterns and fills do not match the appearance of that on the screen, use Pattern scaling to select a different density of printed dots. The Adobe portable document format (PDF) is independent of the application software, hardware, and operating system used to create documents, and also of the output device on which they are displayed or printed.
  • Page 110 Quick copy Job option that prints all copies of a print job and stores the job temporarily on a hard disk for reprinting later. This feature is available when a hard disk is installed and selected in Device Settings. Quick Print tab The Quick Print tab improves usability by providing an easier way to set print options.
  • Page 111 Australia Pty. Ltd. Phone: +886-2-2507-6709 Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113, Fax: +886-2-2507-8432 Australia Phone: +61-2-9888-9999 KYOCERA Document Solutions Korea Co., Ltd. Fax: +61-2-9888-9588 18F, Kangnam bldg, 1321-1, Seocho-Dong, Seocho-Gu, Seoul, Korea Phone: +822-6933-4050 KYOCERA Document Solutions Fax: +822-747-0084 New Zealand Ltd.
  • Page 112 KYOCERA Document Solutions South Africa (Pty) Ltd. KYOCERA Document Solutions Espana, S.A. KYOCERA House, Hertford Office Park, Edificio Kyocera, Avda. de Manacor No.2, 90 Bekker Road (Cnr. Allandale), Midrand, South Africa. 28290 Las Matas (Madrid), Spain Phone: +27-11-540-2600 Phone: +34-91-6318392...
  • Page 113 Rev. 16.11 2013.07...

Table of Contents