Custom Installing Utilities Only; Editing Driver Properties - Kyocera TASKalfa 6501i User Manual

Custom Installing Utilities Only

1
2
3
4
5
6

Editing Driver Properties

1
Printer Driver
This section describes the custom installation of utilities without printing devices
or drivers,
Ensure that your printing device and computer are turned on and connected by
USB or network cable.
Click the Custom Install button.
Select a utility from the Utilities list, and click the arrow to move it to the
Products to Install list. If the most recent version of a utility is installed, the
utility is disabled in the list and shows the message, "Newer version already
installed."
KYOCERA Net Viewer
This utility lets you organize and monitor network printing device information
with many different features that are available, through default views, as well
as custom views that you can create.
Kyocera TWAIN Driver
This utility lets you scan TWAIN-supported applications.
File Management Utility
This utility classifies and distributes scanned files.
KYOCERA Net Direct Print
This utility makes PDF printing easier.
FONTS
This utility loads screen fonts that match the printer's fonts.
If you want to remove a product from the Products to Install list, select it and
click Remove at the bottom of the list box. To remove all products, click
Remove all.
Review your settings. At least one utility must be selected to enable the Install
button. If your settings are correct, click Install.
To exit the installer application click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
The installation of the utilities are now complete. If prompted, restart your
computer.
You can select driver properties for drivers. To use this feature, a device and
driver must be moved to the Products to Install list.
In the Product Library window, click the Custom Install button.
Installation
1-6