Exit Maintenance Mode; Print Out A User Setting List; Make Test Copies - Kyocera TASKalfa 2551ci Service Manual

4. Make test copies.

If image quality is unsatisfactory after test copying, execute calibration,
then retry U410-Adjusting the halftone automatically.
[Output an own-status report (maintenance item U000)]
1. Enter the maintenance mode by entering 10871087 using the numeric keys.
2. Enter 000 using the numeric keys and press the start key.
3. Select Maintenance and press the start key to output a list of the current settings of the maintenance
items.
4. Press the stop key to exit.
[Clearing the counter (maintenance item U927)]
1. Enter 927 using the numeric keys and press the start key.
2. Select [Excute].
3. Press the start key. The counter is cleared.
4. Press the stop key to exit.
[Setrting the delivery date (maintenance item U278)]
1. Enter 278 using the numeric keys and press the start key.
2. Select [Today].
3. Press the start key. The delivery date is set.
4. Press the stop key to exit.

Exit maintenance mode

1. Enter "001" using the numeric keys and press the start key.

Print out a user setting list

1. Select [Report Print] to print a user setting list.
Make test copies
1. Place an original and make test copies.
Installation is completed.
1-2-14
2NP