Kyocera TASKalfa 2551ci Service Manual page 95

5. Remove two screws and then remove
the bandage lid.
6. Pass the vender wire connector through
the aperture in the IF mount.
7. Secure the vender wire socket with two
screws removed in step 5.
8. Secure the grounding terminal of the
vender wire to IF mount with the screw.
9. Connect the vender wire connector to
the vender signal cable connector.
Screw
Screw
Figure 1-2-100
IF mount
Vender wire socket
Screw
Screw
Screw
Vender wire connector
Figure 1-2-101
1-2-72
Bandage lid
Vender signal
cable connector
2NP-1
Grounding
terminal