Paper Is Wrinkled; Image Is Off-Set; Part Of Image Is Missing; Fusing Is Loose - Kyocera TASKalfa 2551ci Service Manual

(13) Paper is wrinkled.

Print example
Paper curled.
Paper damp.
Defective pressure springs.

(14) Image is off-set.

Print example
Deformed or worn cleaning
blade in the drum unit.
Defective fuser unit.
Wrong types of paper.

(15) Part of image is missing.

Print example
Paper damp.
Paper creased.
Drum condensation.
Dirty or flawed drum.
Dirty transfer belt.
Dirty transfer roller.

(16) Fusing is loose.

Print example
Wrong types of paper.
Flawed heat roller or press
roller.
Defective pressure springs.
Defective fuser heater.
Causes
Check the paper storage conditions.
Check the paper storage conditions.
Replace the fuser unit (see page 1-5-17).
Causes
Replace the drum unit (see page 1-5-15).
Replace the fuser unit (see page 1-5-17).
Check if the paper meets specifications. Replace paper.
Causes
Check the paper storage conditions.
Replace the paper.
Perform the drum refresh operation.
Perform the drum refresh operation.
Flawed drum. Replace the drum unit (see page 1-5-15).
Clean the transfer belt. Replace the intermidate transfer
unit if it is extremely dirty (see page 1-5-16).
Clean the transfer roller. Replace the transfer roller unit if it
is extremely dirty (see page 1-5-16).
Causes
Check if the paper meets specifications, replace paper.
Replace the fuser unit (see page 1-5-17).
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
1-4-80
2NP