EG2–74
ENGINE
–
ENGINE MECHANICAL
CYLINDER HEADS ASSEMBLY
(See Components)
HINT:
Thoroughly clean all parts to be assembled.
Before installing the parts, apply new engine oil
to all sliding and rotating surfaces.
Replace all gaskets and oil seals with new ones.
1. INSTALL VALVES
(a) Using SST, push in a new oil seal.
SST 09201 –41020
HINT: The intake valve oil seal is gray and the exhaust
valve oil seal is brown.
(b) Install the following parts:
(1) Valve
(2) Spring seat
(3) Valve spring
(4) Spring retainer
(c) Using SST, compress the valve spring and place the
two keepers around the valve stem.
SST 09202–43013