Disconnect High–Tension Cords From Distributor Cap - Toyota 22R-E Service Manual

IG–24
IGNITION SYSTEM – (3VZ– E)
DISTRIBUTOR
COMPONENTS
DISTRIBUTOR REMOVAL
1. DISCONNECT HIGH–TENSION CORDS FROM
DISTRIBUTOR CAP
(a) Using a screwdriver, lift up the lock claw and dis–
connect the holder from the distributor cap.
(b) Disconnect the high–tension cord at the grommet.
DO NOT pull on the cord.
NOTICE:
Pulling on or bending the cords may damage the
conductor inside.
Do not wipe any of the oil from the grommet after
the high–tension cord is disconnected.
2. DISCONNECT DISTRIBUTOR CONNECTOR