MA–14
MAINTENANCE
–
MAINTENANCE OPERATIONS
(c) Check the disc for runout.
Minimum disc runout:
Ex. C & C 0.09 mm (0.0035 in.)
C & C 0.12 mm (0.0047 in.)
18. INSPECT REAR BRAKE LININGS AND DRUMS
(See BR section)
(a) Check the lining – to – drum contact condition and
lining wear.
Minimum lining thickness:
1.0 mm (0.0039 in.)
(b) Check the brake drum for scoring or wear.
Maximum drum inside diameter:
2WD 256.0 mm (10.079 in.)
4WD 297.0 mm (11.693 in.)
(c) Clean the brake parts with a damp cloth.
NOTICE: Do not use compressed air to clean the brake
parts.
CHASSIS
19. INSPECT STEERING LINKAGE
(a) Check the steering wheel freeplay.
Maximum:
30 mm (1.18 in.)
With the vehicle stopped and pointed straight ahead,
rock the steering wheel gently back and forth with
light finger pressure.
If incorrect, adjust or repair.