Cold Start Injector On-Vehicle Inspection; Inspect Resistance Of Cold Start Injector - Toyota 22R-E Service Manual

EG2–208
ENGINE – MFI SYSTEM
COLD START INJECTOR
ON–VEHICLE INSPECTION

INSPECT RESISTANCE OF COLD START INJECTOR

(a) Disconnect the cold start injector connector.
(b) Using an ohmmeter, check the resistance of the in–
jector.
Resistance:
2–4
If the resistance is not as specified, replace the cold
start injector.
(c) Connect the cold start injector connector.
COMPONENTS FOR REMOVAL AND
INSTALLATION