Disconnect Clutch Release Cylinder Hose; Remove Ps Drive Belt And Pump Pulley - Toyota 22R-E Service Manual

ENGINE – ENGINE MECHANICAL
ENGINE REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL
OF BATTERY
2. REMOVE HOOD
3. REMOVE BATTERY
4. REMOVE ENGINE UNDER COVER
5. DRAIN ENGINE COOLANT
6. DRAIN ENGINE OIL
7. REMOVE AIR CLEANER AND HOSE
8. REMOVE RADIATOR
(a) Disconnect the reservoir hose.
(b) (A/T only)
Disconnect the oil cooler hoses.
(c) Remove the radiator hoses.
(d) Remove the two clips and No.2 fan shroud.
(e) Remove the four bolts and No.1 fan shroud.
(f) Remove the four bolts and radiator.
9. (M/T only)

DISCONNECT CLUTCH RELEASE CYLINDER HOSE

10. REMOVE PS DRIVE BELT AND PUMP PULLEY

11. DISCONNECT PS PUMP FROM ENGINE
12. REMOVE A/C DRIVE BELT
EG2–91