Fuel Pressure Regulator Installation; Install Fuel Pressure Regulator - Toyota 22R-E Service Manual

EG2–216
ENGINE – MFI SYSTEM
FUEL PRESSURE REGULATOR
INSTALLATION
(See Components for Removal and Installation)

1. INSTALL FUEL PRESSURE REGULATOR

(a) Fully loosen the lock nut of the fuel pressure regula–
tor.
(b) Apply a light coat of gasoline to a new 0–ring and
install it to the fuel pressure regulator.
(c) Thrust the fuel pressure regulator completely into the
delivery pipe by hand.
(d) Turn the fuel pressure regulator counterclockwise
until the outlet faces in the direction indicated in the
illustration.
(e) Torque the lock nut.
Torque: 29 N–m (300 kgf–cm, 22 ft–lbf)
2. INSTALL AIR INTAKE CHAMBER
(a) Position a new gasket on the intake manifold.
(b) Install the intake chamber with the six bolts and two
nuts.
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)