Disconnect Air Cleaner Hose - Toyota 22R-E Service Manual

EG2–240
ENGINE – MFI SYSTEM
THROTTLE BODY REMOVAL
(See Components for Removal and Installation)
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL
OF BATTERY
2. DRAIN ENGINE COOLANT FROM THROTTLE BODY
3. DISCONNECT FOLLOWING CABLES:
(a) (w/ Cruise control)
Actuator cable with bracket
(b) Accelerator cable
(c) (A/T)
Throttle cable

4. DISCONNECT AIR CLEANER HOSE

6. DISCONNECT VACUUM HOSES
6. REMOVE ACCELERATOR CABLE BRACKET
7. DISCONNECT THROTTLE POSITION SENSOR
CONNECTOR
8. REMOVE THROTTLE BODY
(a) Remove the four bolts, throttle body and the gasket.
(b) Disconnect the No.4 and No.5 water by–pass hoses
from the throttle body.