Crankshaft Position; Rh Camshaft Pulley Position; Lh Camshaft Pulley Position; Connect Timing Belt To Lh Camshaft Timing Pulley - Toyota 22R-E Service Manual

ENGINE – ENGINE MECHANICAL
8. SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) (Crankshaft Position)
Turn the crankshaft pulley, and align its groove with
timing mark "0" of the No.1 timing belt cover.
(b) (RH Camshaft Pulley Position)
Turn the camshaft, align the knock pin hole of the
camshaft with the timing mark of the No.3 timing belt
cover.
(c) (LH Camshaft Pulley Position)
Turn the camshaft timing pulley, align the timing
marks of the camshaft timing pulley and No.3 timing
belt cover.
9. CONNECT TIMING BELT TO LH CAMSHAFT
TIMING PULLEY
(a) Check that the installation mark on the timing belt is
aligned with the end of the No.1 timing belt cover.
(b) Remove any oil or water on the LH camshaft timing
pulley, and keep it clean.
(c) Using SST, slightly turn the LH camshaft timing pulley
clockwise. Align the installation mark on the timing
belt with the timing mark of the camshaft timing
pulley, and hang the timing belt on the LH camshaft
timing pulley.
SST 09278–54012
EG2–43