Visual Verification - DSC HS2128 Reference Manual

Alarm memory request
l
Zone bypass
l
Zone unbypass
l
SMS text messages must be formatted as follows:
<function name><space><partition #><space><access code>
e.g., Stay Arm partition 1 1234
Once the command is received and executed by the alarm system, the user receives a confirmation text message.
Note: Do not use Away Arm if Push to Set [001][072] or Final Door Set [001][016] zones are programmed.

5.9 Visual Verification

This feature enables the central station operator to view captured images of the premises in the event of an alarm event.
Combination camera/motion detectors can be installed throughout the premises to provide visual verification coverage. The
microphone on the camera PIR can be disabled.
Visual verification sessions are triggered by the following:
Fire key
l
Medical key
l
Panic key
l
Alarms detected by armed PIR Cameras
l
To set up video verification on a partition:
Enroll the camera PIR; [804]
l
Set video verification options; [804]>[841]:
l
[001] Visual Verification Enable/Disable
l
[002] View Time Window
l
[003] View Other Alarms
l
Input a custom label to identify the camera PIR; [000]>[001]
l
Enable this option on the alternate communicator (section [10] option 2).
l
Refer to the Camera PIR installation manual for more details.
Note: Visual Verification has not been evaluated by UL and shall be disabled for UL certified installations.
Note: While an image is being transferred from the PIR camera to a central station receiver, the product cannot capture addi-
tional images.
Section 5: System Operation
- 61 -