DSC HS2128 Reference Manual page 26

3.1.13 CO Detector
The following hardwired CO detector models can be used with PowerSeries Neo alarm controllers:
Potter Model CO-12/24, UL File E321434
l
Quantum Model 12-24SIR, UL File E186246
l
NAPCO Model FW-CO12 or FW-CO1224, UL File E306780
l
System Sensor Model CO1224, UL File E307195
l
Note: For multiple unit connections, the leads between CO detectors must be broken. The power supervision relay must be
powered from the last detector in the loop.
Wireless CO detectors are also available. When installing wireless CO detectors, use only model PG9913
PG4913. An HSM2HOSTx (x=9
required when installing wireless CO detectors. For more details on these wireless devices, refer to their respective install-
ation manuals.
UL
Note: Use only approved devices with UL/ULC listed systems.
Table 3-10 CO Detector Ratings
Device Description
CO-12/24 Potter model CO detector
12-24SIR Quantum model CO detector
FW-CO12 NAPCO model CO detector
FW-CO1224
CO1224 System Sensor model CO detector
Figure 3-14 CO Detector Wiring
UL
/8/4) wireless receiver or HS2LCDRF(P)x/HS2ICNRF(P)x (x=9
Max Rating @12VDC
40mA
75mA
90mA
40mA
- 26 -
UL
, PG8913,
UL
/8/4) wireless keypad are