Annunciation - DSC HS2128 Reference Manual

keypads
l
8 zone expander modules
l
8 output expander modules
l
wireless transceiver
l
power supply
l
4 high-current output module
l
alternate communicator module
l
audio module
l
siren
l
repeater
l
The maximum label size is 14 ASCII characters.
See "[801] Keypad Labels" on page 70 for more details.
5.3.5 Event Labels
Customizable labels can be created for the following events:
Fire alarm
l
Fail to arm
l
Alarm when armed
l
CO alarm
l
The maximum label size is 14 ASCII characters. See page 67 for more details.
5.3.6 Partition Command Output Labels
This feature is used to program custom labels for command outputs. These labels are used with output activation events in
the event buffer. The maximum label size is 14 x 2 ASCII characters. See "[201]-[208][001]-[004] Partition Command Output
Labels" on page 69 for more details.

5.4 Annunciation

5.4.1 Door Chime
The keypad can be programmed to use one of four different door chime tones for each zone on the system. Chime is active
only during the disarm state. Only one door chime option can be enabled for each zone.
Beeps
l
Bing-Bong
l
Ding-Dong
l
Alarm Tone
l
Zone Name - Voice Annunciation (HS2LCDWF keypads only)
l
Chime is enabled/disabled on a partition using the [*][4] command.
5.4.2 Temperature Display
Indoor and outdoor temperature can be displayed on system keypads if configured in keypad programming section [861]-
[876]>[023] option 7, and sections [041]-[042]. Temperature is detected using wireless temperature sensors installed on the
system. Refer to "Compatible Devices" on page 9.
Global keypads only display outdoor temperature.
Section 5: System Operation
- 41 -